Eiki LC-UXT3 Input/Output Terminals And Jacks, INPUT 1, 2, 3, Connecting Projector

CONNECTING PROJECTOR

	INPUT/OUTPUT TERMINALS AND JACKS
INPUT 2	INPUT 1	INPUT 1, 2, 3, 4

5 BNC INPUT JACKS	DVI INPUT TERMINAL
Connect component video output (Cr, Y,	Connect computer output
Cb or Pr, Y, Pb) from video equipment to	(Digital/Analog DVI-I type)
R/Pr, G/Y and B/Pb jacks or connect	to this terminal.
computer output [5 BNC Type (Red,	(Refer to P14.)
Green, Blue, Horiz. Sync and Vert.
Sync.)] from computer to R/Pr, G/Y,
B/Pb, H/HV and V jacks. (Refer to P14,
15)

SERIAL PORT IN				DVI			AUDIO	L	CONTROL PORT
							R
							(MONO)
SERIAL PORT OUT		R/Pr	G/Y	B/Pb	H/HV	V	AUDIO		CONTROL PORT
							R	L
							(MONO)
R/C JACK	USB	VIDEO/Y	C		S-VIDEO		AUDIO
							R	L
							(MONO)
AUDIO OUT							AUDIO		CONTROL PORT
R	L		ANALOG RGB
							R	L
	RESET
	(MONO)						(MONO)

INPUT 3 INPUT 4

AUDIO INPUT JACKS

Connect audio output from computer or video equipment to these jacks. (Refer to P14, 15.)

INPUT 1

2	INPUT 1, 2, 4
INPUT
	CONTROL PORT CONNECTORS
	When controlling computer
3	with Remote Control of this
	projector, connect mouse port
INPUT
	of your personal computer to
	these connectors. (Refer to
	P14.)
INPUT 4

INPUT 3

AV INPUT (VIDEO/Y, C) JACKS	HDB 15-PIN INPUT TERMINAL
Connect composite video output from	Connect computer output
video equipment to VIDEO/Y jack or	(Analog HDB 15-pin type) to
connect Separate Y/C video outputs to	this terminal.
VIDEO/Y and C jacks. (Refer to P15.)	(Refer to P14.)

S-VIDEO INPUT JACK

Connect S-VIDEO output from video equipment to this jack. (Refer to P15.)

12