Panasonic WV-CW484F operating instructions Connections, Video Output Connection, Power Connection

Connections

Caution: ONLY CONNECT THIS TO 24 V AC or 12 V DC CLASS 2 POWER SUPPLY. Be sure to connect the grounding lead to the GND terminal.

Power cable (Approx. 22 cm {8.66"})

Brown (Live)	To 24 V AC or 12 V DC
Blue (Neutral)	power supply
Green/Yellow (GND)	To GND

*When using 12 V DC power supply, the optional heater unit is unavailable.

BNC connector BNC connector

Video output cable (Approx. 19 cm {7.48"})

BNC connector

To VIDEO IN

●Video Output Connection

Connect the video output connector to the monitor or other system device with the pro- cured coaxial cable. The maximum extensi- ble length is shown in the table.

Type of coaxial		RG-59/U	RG-6/U	RG-11/U	RG-15/U
cable		(3C-2V)	(5C-2V)	(7C-2V)	(10C-2V)
Recommended	m	250	500	600	800
maximum
		825	1 650	1 980	2 640
cable length	ft

●Power Connection

Precaution:

The following connections should be made by qualified service personnel or system installers in accordance with NEC 725-51.

• Wire Colors & Functions

Camera power cable

Wire Color	24 V AC		12 V DC
Brown	24	V AC (L)	Positive
Blue	24	V AC (N)	Negative
Green/Yellow	To GND

Cautions:

•Be sure to connect the GND (grounding) lead of the camera and grounding termi- nal of the power supply when using a 24 V AC power source.

•Shrinking the cable-entry seal is a one- time procedure. Do not shrink the cable- entry seal until it has been ascertained that unit is functioning.

CONNECT THIS TO 24 V AC or 12 V DC CLASS 2 POWER SUPPLY ONLY.

•To prevent file or electric shock hazard, the UL listed wire VW-1 style 1007 should be used for the cable for Input Terminals.

•Do not use a transformer larger than 10 VA.

23