13
Installations
The following installation should be made by qualified service personnel or system installers.
Important:
• Prepare four fixing screws to be used to mount the provided camera attachment according
to the material of the area where the attachment is to be installed.
Recommended tightening torque is as follows.
M4: 1.6 N·m {16 kgf·cm}
• Do not use wood screws to fix the camera mounting bracket (option) since they are not
strong enough to support the weight of the camera and the bracket.
• When using the provided camera attachment, make sure that either of the arrow marks
faces upward.
• When the installation area is not strong enough, reinforce and strengthen it or use Mounting
Bracket WV-Q114 (option) or Ceiling Mount Bracket WV-Q166 (option).
• Required pull-out capacity of a single screw/bolt is 196 N {20 kgf} or more.
• When using an optional mounting bracket, refer to the operating instructions of the bracket
in use.

■Installations

●Using a Junction Box

Secure the provided camera attachment to the two gang junction box (4 in. x 4 in.) built in a
wall or ceiling.
<Mounting hole pattern>
46 mm {1-13/16"}
Junction box
Camera attachment (provided)
83.5 mm
{3-5/16"}