Panasonic Power cable 12 V DC or 24 V AC Cautions, Zoom lock lever WV-CW484F, WV-CW484S

qPower cable (12 V DC or 24 V AC) Cautions:

1.Connect to 12 V DC (10.5 - 16 V) or 24 V AC (19.5 V - 28 V) class 2 power supply only. Make sure to connect the grounding lead to the GND terminal when the power is supplied from a 24 V AC power source.

2.To prevent fire or electric shock haz- ard, use a UL listed cable (VW-1, style 1007) for the Input Terminal.

wVideo output cable with BNC connec- tor

Connects with the video connector of the monitor.

eDome cover

rFocus lock lever (WV-CW484F, WV-CW484S)

Fixes the focus position.

tZoom lock lever (WV-CW484F, WV-CW484S)

Fixes the zoom position.

yTilting lock screw Fixes the tilting position.

uAzimuth (Angle adjuster)

Shoots in a straight-angle field of view when aiming at an object in a slanting direction even if the tilt angle has been set.

iPanning table

Adjusts the panning angle of the camera.

oPanning lock screw Fixes the panning position.

!0Camera lock screw

Fixes the camera and camera attach- ment.

!1Monitor output Jack (3.5 diam. mini jack)

Connects the LCD monitor and such devices with 3.5 diam. 2-pole L-type plug for checking images.

!2Optional heater connector (6 pin female)

When an optional heater unit is installed in the camera, the harness exiting from the unit will be connected to this.

!3LED indicator

Shows the ABF status.

!4Operation buttons

!5SET button [(SET), ABF2/MENU]

Activates an item selected in the setup menu. Refer to p. 18 for details on the [ABF2] button.

!4DOWN button [(DOWN), ABF1]

Moves the cursor downward and selects items in the setup SET UP menu.

!5UP button (UP)

Moves the cursor upward and selects items in the setup menu.

!6LEFT button [(LEFT), NEAR]

Moves the cursor to the left, selects the mode and adjusts some levels.

!7RIGHT button [(RIGHT), NEAR]

Moves the cursor to the right, selects the mode and adjusts some levels.

11