5.Select →PUSH SW for SCALE and press SET.
→Zone scale adjustment becomes available.
6.Adjust the zone scale using the [LEFT], [RIGHT], [UP], or [DOWN] button.
7.To apply the settings, move the cursor to SET and press SET.
→The screen returns to the ZONE NUMBER selection menu.
To delete the settings, select DEL and press SET.
13. Electronic Zoom (EL-ZOOM)
1.Move the cursor to
2.Select ON or OFF by pressing L or R. The factory default setting is OFF.
ON: x2 electronic zoom is available with the ZOOM switch on the controller.
OFF: The electronic zoom function is dis- abled.
3.While the cursor is on
4.Move the cursor to PUSH SET for ZOOM and press S to display the ZOOM setting menu.
5.Press U or D to zoom in or out the image.
6.Move the cursor to PUSH SET for PAN/TILT and press the [SET] button. The PAN/TILT setting menu appears.
7.Press [LEFT], [RIGHT], [UP], or [DOWN] but- ton to change the angular field of view.
8.To return to the
**
PAN/TILT | →PUSH | SET |
ZOOM | →PUSH | SET |
U TILT D/L PAN R | ||
RET END |
|
| |
** | |||
PAN/TILT | →PUSH | SET | |
ZOOM |
| →PUSH | SET |
U ZOOM D
RET END
14. Camera Picture Upside Down Positioning (UPSIDE-DOWN)
1.Move the cursor to
2.Select ON when you want to turn the picture upside down.
15. Auto Image Stabilizer (STABILIZER)
This function electronically compensates for an unstable camera image due to movement of a mounting pole or bracket. The default setting is OFF.
ON: Automatically compensates for an unstable image.
OFF: Image stabilizer will not operate.
Notes:
•When set to ON, some effective pixels on the edge of the CCD are used by the stabilization function. This may result in a small reduction in resolution and a narrower angle of view. After activating the image stabilizer function, check that the field of view is correct.
40
