TP-Link TL-WR700N manual 150Mbps Wireless N Mini Pocket Router

TL-WR700N

150Mbps Wireless N Mini Pocket Router

Figure 8-8 Wireless Settings - Client

¾SSID - Enter a string of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. The default SSID is set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each Router’s MAC address). But it is recommended strongly that you change your networks name (SSID) to a different value. This value is case-sensitive. For example, TEST is NOT the same as test.

¾MAC of AP - The MAC address of AP that you want to access.

¾Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance.

¾Survey - Click this button, you can survey the AP which runs in the current channel.

¾Security Type - This option should be chosen according to the AP's security configuration. It is recommended that the security type is the same as your AP's security type.

¾WEP Key Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It indicates the index of the WEP key.

¾Authentication Type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It indicates the authorization type of the Root AP.

¾PassWord - If the AP your Router is going to connect needs password, you need to fill the password in this blank.

- 146 -