TP-Link TL-WR700N 150Mbps Wireless N Mini Pocket Router, 10 Quick Setup - WAN Connection Type

TL-WR700N

150Mbps Wireless N Mini Pocket Router

Figure 3-10 Quick Setup - WAN Connection Type

The Router supports three popular ways PPPoE, Dynamic IP and Static IP to connect to the Internet. To make sure the connection type your ISP provides, please refer to the ISP. Make sure the cable is securely plugged into the WAN port before detection.

¾PPPoE - For this connection, you will need your account name and password from your ISP.

If you have applied ADSL to realize Dial-up service, you should choose this type. Under this condition, you should fill in both the User Name and Password that the ISP supplied. Please note that these fields are case-sensitive.

Figure 3-11 Quick Setup - PPPoE

¾Dynamic IP - Your ISP uses a DHCP service to assign your Router an IP address when connecting to the Internet.

When the Router connects to a DHCP server, or the ISP supplies you with DHCP connection, please choose this type. The Router gets the IP address automatically from the DHCP server or the ISP if you choose Dynamic IP, and then the next screen will appear as shown in Figure 3-16.Then you can go on with the wireless configuration.

¾Static IP - This type of connection uses a permanent, fixed (static) IP address that your ISP assigned.

In this type, you should fill in the IP address, Subnet Mask, Default Gateway, and DNS IP address manually, which are specified by your ISP.

- 17 -