TP-Link TL-WR700N Panel Layout, ¾ LED, Status, Indication, 150Mbps Wireless N Mini Pocket Router

TL-WR700N

150Mbps Wireless N Mini Pocket Router

1.4 Panel Layout

Figure 1-1 TL-WR700N sketch

¾LED

Status		Indication
On		The system is working properly.
Flashing	The LAN/WAN cable is connected.
Off		The system is working improperly, please check the
		device connection.
		Table 1-1 The LED Description

¾LAN/WAN: This LAN/WAN port works as LAN in AP/Repeater/ Bridge/Client mode and as WAN in Router mode. As LAN, it connects the Router to the local PC; as WAN, it enables you connect the DSL/cable Modem, or Ethernet.

¾RESET：It is used to reset the Router to its factory defaults. With the Router powered on, use a pin to press and hold the RESET button (about 5 seconds) until the SYS LED becomes quick-flash from slow-flash. And then release the button and wait the Router to reboot to its factory default settings.

¾Power Plug: Plug in standard electrical wall socket directly to power the Router.

- 4 -