APPENDIX

TROUBLESHOOTING

Before calling your dealer or service center for assistance, check matters below once again.

1.Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 12 ~ 15.

2.Check cable connection. Verify that all computer, video and power cord are properly connected.

3.Verify that all power is switched on.

4.If a projector still does not produce an image, re-start your computer.

5.If an image still does not appear, unplug a projector from your computer and check your computer monitor's display.Problem may be with your graphics controller rather than with a projector. (When you reconnect a projector, be sure to turn a computer and monitor off before you power up a projector. Power equipment back on in order of : Projector and computer.)

6.If problem still exists, check following chart.

Problem:

Try these Solutions

No power.

Plug a projector into your AC outlet.

 

Turn MAIN ON/OFF switch to ON.

 

Press POWER ON/OFF switch to ON.

 

Make sure READY Indicator lights.

 

Wait 90 seconds after a projector is turned OFF when turning a projector back on.

 

NOTE : After pressing Power ON-OFF button to OFF, make sure a projector works as

 

follows:

 

1. LAMP indicator lights red and READY indicator turns off.

 

2. After 90 seconds, READY indicator lights green again and a projector may be

 

turned on by pressing Power ON-OFF button.

 

Check WARNING TEMP. and READY indicator. If both WARNING TEMP. and READY

 

indicator flashes, a projector cannot be turned on.

 

(See "TURNING ON/OFF PROJECTOR" section on page 22.)

 

Check Projection Lamp. (Refer to page 46.)

Image is out of

Adjust focus of a projector.

focus.

Check Projection Lens to see if it needs cleaning.

NOTE : Moving a projector from a cool temperature location to a warm temperature location

 

 

may result in moisture condensation on Projection Lens. In such an event, leave a

 

projector OFF and wait until condensation disappears.

Picture is Left/Right

Check Ceiling / Rear feature. (See “SETTING” section on page 40.)

reversed.

 

 

 

Picture is

Check Ceiling feature. (See “SETTING” section on page 40.)

Top/Bottom

 

reversed.

 

 

 

Some displays are

Check Display feature.(See “SETTING” section on page 40.)

not seen during

 

Operation.

 

 

 

No image.

Check connection between your computer or video equipment and a projector.

 

When turning a projector on, it takes about 30 seconds to display an image.

 

Check system that you select is corresponding with your computer or video equipment.

 

Make sure temperature is not out of Operating Temperature (5°C ~ 35°C).

 

 

No sound.

Check audio cable connection from audio input source.

 

Adjust audio source.

 

Press VOLUME (+) button.

 

Press MUTE button.

 

 

48

Page 48
Image 48
Eiki LC-UXT3 instruction manual Troubleshooting

LC-UXT3 specifications

The Eiki LC-UXT3 is an advanced multimedia projector that excels in delivering high-quality presentations and engaging visual experiences across various environments. Designed for versatility, it is ideal for educational institutions, corporate offices, and large venues.

One of the standout features of the LC-UXT3 is its impressive resolution. With a WUXGA resolution of 1920 x 1200 pixels, it provides sharp and detailed images that enhance the viewing experience. This high resolution is particularly beneficial for displaying intricate graphics, texts, and videos, making it suitable for both professional and educational use.

The projector boasts a powerful brightness level of 6000 lumens, ensuring vivid images even in well-lit rooms. This high lumen output allows for optimal performance during daytime presentations or in environments where light control is limited. Additionally, the LC-UXT3 features a high contrast ratio, which enhances color accuracy and depth, giving presentations a professional touch.

In terms of connectivity, the Eiki LC-UXT3 excels with multiple input options, including HDMI, VGA, and composite video ports. This versatility allows users to connect a variety of devices such as laptops, tablets, and other multimedia sources seamlessly. Furthermore, the projector supports wireless connectivity, enabling easy interactions with devices without the need for messy cables.

The LC-UXT3 incorporates advanced technology to enhance its performance. With its 3LCD technology, the projector delivers bright and vibrant colors while minimizing the risk of the "rainbow effect" often associated with single-chip projectors. This technology ensures accurate color reproduction, making it perfect for dynamic presentations that require color precision.

Another noteworthy characteristic of the Eiki LC-UXT3 is its extensive range of lens options, which allows for flexible installation setups. The motorized lens shift, zoom, and focus features facilitate easy adjustments, making it an ideal choice for various rooms and setups.

In conclusion, the Eiki LC-UXT3 is a feature-rich multimedia projector that combines high brightness, resolution, and connectivity options, making it an excellent choice for professional and educational settings. Its advanced technologies and flexible installation capabilities make it a reliable tool for any presentation need, ensuring a powerful and engaging visual experience every time.