Eiki LC-WS250 owner manual Video Input Image Mode Selection

Video Input

Image Mode Selection

Direct Operation	Remote Control
Select the desired image mode from among Dynamic,	ASPECT
Standard, Cinema, Blackboard (Green), Colorboard,
Image 1, Image 2, Image 3, and Image 4 by pressing the
IMAGE button on the remote control.

	Menu Operation	IMAGE button
1	Press the MENU button to display the On-Screen Menu.
	Use the Point ▲▼ buttons to select Image select and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select the desired item
	and then press the SELECT button.

Dynamic	Image select Menu
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode helps enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Colorboard
Press the Point ► button at Colorboard, and then use the
Point ▲▼ buttons to switch the desired item (Red, Blue,
Yellow, Green) and then press the SELECT button.
At the time of simple projection on the colored wall, you can
get the close color image to the color image projected on a
white screen by selecting the similar color to the wall color
from the preset four colors.
Image 1-4
For viewing with the user preset image mode in the Image
adjust Menu (see pages 41-42).

IMAGE button Dynamic

Standard

Cinema

Blackboard (Green)

Colorboard

Image 1

Image 2

Image 3

Image 4

40