Setting
Ceiling
When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a
Rear
When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.
Screen aspect
This function is used to project the image to a 4:3 or 16:9 projection screen.
4:3 ..... Set to a 4:3 projection screen.
16:9 ..... Set to a 16:9 projection screen.
16:10 ....16:10 is the aspect of the LCD panel. The orignal
Screen Menu is available.
HDMI setup
This function is only used for HDMI input source.
Image
Select Normal or Enhanced to match the video range setting of your HDMI Digital RGB equipment.
Sound
HDMI: When using the HDMI cable, select HDMI. Both video and audio are transferred and you need not to connect any additional cables for audio.
Computer : When using the
COMPUTER/COMPONENT AUDIO IN terminal.
The names for the output setting of Digital RGB vary from equipment to equipment. For details, refer to the owner’s manual of your Digital RGB equipment.
When the black parts of the image are destroyed or stand out, please switch to Normal or Enhanced, and then switch the output type of the HDMI Digital RGB output equipment.
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output (p.9).
Computer 2…… Computer input
Monitor Out…… Monitor out
Terminal function is not available when Computer 2 is selected to the input source. Change the input source to the others (Computer 1, Video or HDMI) so that the Terminal function is available
Ceiling
Rear
Note:
•When 4:3 or 16:9 is selected, True and Digital zoom +/- are not available in the PC screen
•When 4:3 or 16:9 is selected, Zoom, Natural wide and Wide are not available in the AV screen (p.43).
HDMI setup
50
