Video Input
Sharpness
Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15).
Gamma
Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select one of the following options to get smoother images.
Off | Disabled. |
L 1 | Lower reduction. |
L 2 | Higher reduction. |
Progressive
An interlaced video signal can be displayed in progressive mode. Select one of the following options.
Off | Disabled. |
L 1 | For an active picture. |
L 2 | For a still picture. |
Film | For watching a film. With this function, the |
| projector reproduces pictures faithful to the |
| original film quality. |
Reset
To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.
Store
To store the adjusted data, select Store and press the Point
►button or the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image
Note:
Noise reduction and Progressive can not be selected when 480p, 575p, 720p, 1035i or 1080i is selected (p.39), or Video delay control function is set to On in Setting menu (p.57).
Store Menu
A confirmation box appears and then select Yes..
42
