Basic Operation

AUTO PC button

Press the AUTO PC button on the remote control to operate the Auto PC function.

For more detail, see 27.

D.ZOOM buttons

Press the D.ZOOM buttons on the remote control to zoom in and zoom out the images.

For more detail, see 33.

NO SHOW button

Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User” in the Logo selection (p42), the screen changes each time you press the NO SHOW button as follows.

black out the captured image normal • • • • •

KEYSTONE button

For detail, see p22.

IMAGE button

Press the IMAGE button on the remote control to select a desired image level of the screen.

For more detail, see p30, 37.

P-TIMER button

Press the P-TIMER button on the remote control. The timer display “00 : 00” will appear on the screen and the timer will start to count time (00 : 00 ~ 59 : 59).

To stop the P-Timer, press the P-TIMER button. Press the P-TIMER button again, then the P-timer display will disappear.

LAMP CONTROL button

Press the LAMP CONTROL button on the remote control to select the lamp mode for changing the brightness of the screen.

Normal

....normal brightness

Auto

brightness according with the input signal

Eco

lower brightness reduces the lamp

 

power consumption and extends the

 

lamp life.

Remote Control

 

KEYSTONE button

Volume +/-

(See p22)

buttons

POINT ed

(See p23)

buttons

 

AUTO PC

 

button

IMAGE button

D.ZOOM

P-TIMER button

buttons

 

NO SHOW

 

button

LAMP CONTROL

 

button

Note:

See the previous page for the other buttons.

The message will disappear after 4 seconds.

P-Timer display

24

Page 24
Image 24
Eiki LC-XB23C owner manual Keystone button