Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA or UXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional setting. (Signal formats provided in this projector is shown on page 59 )

One of the following messages may appear when:

Auto

The projector cannot recognize the connected

PC System Menu

 

signal conforming to the provided PC Systems.

 

 

 

 

The message "Auto" will be displayed on the PC

 

 

System Menu icon and the Auto PC Adjustment

 

 

function will work to display proper images. If

 

 

the image is not projected properly, a manual

 

 

adjustment is required. (p28, 29)

 

-----There is no signal input from computer. Check the connection between your computer and the projector. (See " Troubleshooting" p54)

Mode 1 The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in Mode 1~5. (p28, 29)

The Auto PC Adjustment function operates to adjust the projector.

SVGA 1 PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

1

Press the MENU button

to display the On-Screen

 

Menu. Press the Point 7

8 buttons to move the red

 

framed pointer to the PC System Menu icon.

2

Press the Point ed buttons to move the red arrow

 

pointer to the system that you want to set, and then

press the SELECT button.

PC System Menu

The PC System Menu icon Selected system is displayed.

Systems on this dialog box can be selected.

Custom Mode (1~5) set in the

PC Adjust Menu. (p27, 29)

26

Page 26
Image 26
Eiki LC-XB23C owner manual Computer System Selection, Selecting Computer System Manually