Computer Input

For zooming in and out the images

Digital zoom +

When the Digital zoom + is selected, the On-Screen Menu will disappear and the message “D. zoom +” will be displayed. Press the SELECT button to expand the image size. And press the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size.

A projected image can be also expanded by pressing the D.ZOOM ▲ button on the remote control.

Digital zoom –

When Digital zoom – is selected, the On-Screen Menu will disappear and the message “D. zoom –” will be displayed. Press the SELECT button to compress image size.

A projected image can be also compressed by pressing the D.ZOOM ▼ button on the remote control.

To exit the Digital zoom +/– mode, press any button except the D.ZOOM ▲▼ buttons, SELECT, and Point button.

To return to the previous screen size, select a screen size from the Screen Size Adjustment or select an input source from the Input Source Selection (p25) again, or adjust the screen size with the D.ZOOM ▲▼ buttons.

Remote Control

POINT buttons

SELECT button

D.ZOOM + button

D.ZOOM - button

Note:

•The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. (p29)

•The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working.

True, Full screen, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p26).

•Digital zoom +/- cannot be selected when Full screen or True is selected.

Computer Input

33

Page 33
Image 33
Eiki LC-XB23C owner manual Digital zoom +