Eiki LC-XB26, LC-XB21 owner manual Input Source Selection Component, RGB Scart 21-Pin

Video Input

Input Source Selection (Component, RGB Scart 21-Pin)

Direct Operation

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below.

Menu Operation

1	Press the MENU button and the On-Screen Menu will
	appear. Press the Point 7 8 button to move the red frame
	pointer to the Input Menu icon.
2	Press the Point d button to move the red arrow pointer to
	Computer 2, and then press the SELECT button. The Source
	Select Menu will appear.
3	Move the pointer to the correct input source and then press
	the SELECT button.
		When the input source is coming from video
Component
		equipment connected to the COMPUTER IN 2/
		COMPONENT IN/ MONITOR OUT terminal with
		a Component-VGA Cable, select Component.
		When the input source is coming from video
RGB (Scart)
		equipment connected to the COMPUTER IN 2/
		COMPONENT IN/ MONITOR OUT terminal with
		a Scart-VGA Cable, select RGB (Scart).

INPUT button

Computer 1

Computer 2 ✳

Video

COMPUTER button

Computer 1

Computer 2 ✳

✳See Note on the bottom of this page.

Input Menu icon

Input Menu

Move the pointer (red arrow)

to Computer 1 and press the

SELECT button.

Computer

2

Source Select Menu

Move the pointer to Component or RGB (Scart) and press the SELECT button.

✔Note:

•Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page 61 for order.

•Computer 2 is not displayed when the COMPUTER IN 2/COMPONENT IN/ MONITOR OUT terminal is set as Monitor out. (p44)

36