Video Input
Progressive
Interlaced video signal can be displayed in a progressive picture.
Off . . . .Not activated.
L1 . . . . .Select “L1” for an active picture.
L2 . . . . .Select “L2” for a still picture.
Film
This function is effective on 3:2 pulldown video sources. With this function On, the projector reproduces pictures faithful to the original film quality.
Reset
Resets all adjustment to their previous figure. | Store icon |
|
Store
To store the adjustment data, move the red frame pointer to the Store icon and press the SELECT button. The Image Level Menu will appear. Move the red frame pointer to the Image Level 1 to 4 and then press the SELECT button.
Quit
Closes the Image Adjust Menu.
✔Note:
•Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected. (p37)
•Film can only be activated when selecting NTSC for Video System and L1/ L2 for Progressive.
•3:2 Pulldown or Telecine transfer is the process of changing images from film mode to video mode. While film runs at 24 frames per second (fps), NTSC television signals (or video) have a run rate of 30fps so the 24 fps film needs to be speeded up to 30fps and transferred using a proper field pattern to get the best
Image Level Menu
Move the red frame pointer to an image icon to be set and then press the SELECT button.
40