Eiki LC-XB29N owner manual Pointer to Computer 1 Digital, and then press

Computer Input

Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Direct Operation

Choose Computer 1(Digital) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Top Control

	POWER	WARNING
ON	MENU	INPUT
-
OFF
	SELECT

INPUT button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Video

Wired

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 78 buttons to move the red
	frame pointer to the Input Menu icon.
2	Use the Point ed buttons to move the red arrow
	pointer to Computer 1 (Digital), and then press the
	SELECT button.
3	After the Source Select Menu appeared for Computer
	1 (Digital), move the pointer to RGB (PC digital) or RGB

(AV HDCP), and then press the SELECT button.

✔Notes:

•Computer 2 is not displayed when the COMPUTER IN 2 / COMPONENT IN / MONITOR OUT terminal is set as Monitor out. (p.49)

•Computer 2 can accept only RGB signal.

•HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

•Wired, Wireless, Memory viewer are for the Network function. See owner’s manual “Network Set-up and Operation” and owner’s manual of Memory viewer (optionally available).

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.49).

Remote Control

COMPUTER button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer 1 (Digital) and press the SELECT button.

Computer

1

Move the pointer to the source that you want to select and press the SELECT button.

29