Eiki LC-XB40N owner manual Component RGB Scart, Source Select Menu

Video Input

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation Top Control

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

INPUT button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Video

Wired

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 78 buttons to move the red
	frame pointer to the Input Menu icon.
2	Use the Point ed buttons to move the red arrow
	pointer to Computer 2 and then press the SELECT
	button.
3	After the Source Select Menu appeared for Computer
	2, move the pointer to Component or RGB(Scart) and

then press the SELECT button.

Remote Control

COMPUTER button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Input Menu Input Menu icon

Component

RGB (Scart)

✔Note:

When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a Component-VGA Cable, select Component.

When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer

2

Source Select Menu

Move the pointer to Component or RGB(Scart) and press the SELECT button.

•Wired, Wireless, Memory viewer are for the Network function. See owner’s manual “Network Set-up and Operation” and owner’s manual of Memory viewer (optionally available).

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.51).

41