
20
TOMAINTAINTHELIFEOFTHELAMP,ONCE
YOUTURNTHEPROJECTORON,WAITAT
LEASTFIVEMINUTESBEFORETURNINGIT
OFF.
Power off?disappearsafter4seconds.
Turning Off the Projector
PresstheON/STAND-BY button on the top control or
ontheremotecontrol,andPower off? appearsonthe
screen.
Pressthe ON/STAND-BY button again to turn off the
projector.ThePOWERindicatorstartstoblinkred,and
thecoolingfanskeeprunning.(Youcanselectthelevel
offans’quietness andspeed.See “Fan”onpage 55.)
Atthistime,youcanunplugtheAC powercordevenif
thefansarestillrunning.
1
2
3Whenthe projector has cooled down enough, the
POWERindicator stops blinking and you can turn on
theprojector.
Note:
•WhentheOnstartfunctionissettoOn,theprojectorwill
beturnedonautomatically byconnectingtheAC power
cordtoanACoutlet(p.50).
•Therunningspeedofcoolingfansischangedaccording
tothetemperatureinsidetheprojector.
•Donotputtheprojectorinacasebeforethe projectoris
cooledenough.
•IftheWARNINGindicatorblinksorlightsred,see
“WARNINGindicator”onpage58.
•WhilethePOWERindicatorisblinking,thelampisbeing
cooleddownandtheprojectorcannotbeturnedon.Wait
untilthePOWER indicatorstopsblinking toturn onthe
projectoragain.
•Thefanrotation will terminate directly if the AC power
cordis unplugged immediately after the projector is
turnedoff.
•Theprojectorcanbe turned on after the POWER
indicatorturns red. The waiting time to restart will be
shortenedwhenthenormalpower-offprocessingforfan
cooling is completed, compared with the time theAC
powercord is immediately unplugged after the power-
off.
Basic Operation
DONOTOPERATETHEPROJECTOR
CONTINUOUSLYWITHOUTREST.
CONTINUOUSUSEMAYRESULTIN
SHORTENINGTHELAMPLIFE.TURNOFFTHE
PROJECTORANDLETSTANDFORABOUTAN
HOURINEVERY24HOURS.