
47
Setting
CaptureCapture
Thisfunctionenablesyoutocaptureanimagebeing
projectedtouseitforastarting-updisplayorintervalof
presentations.
SelectCaptureandpresstheSELECTbutton.
Aconfirmationboxappearsandselectyestocapturethe
projectedimage.
Aftercapturing the projected image, go to the Logo select
functionandsetitto User.Thenthecapturedimagewill be
displayedthenexttimeyouturnontheprojector.
Tocancelthecapturefunction,selectyesinthe"Quit?"
confirmationbox.
Note:
•Beforecapturing an image, select Standard in th e
Imageselect Menu to capture a proper image (pp.32,
39).
•Asignal from a computer can be captured up to XGA
(1024x 768).A signal from video equipment can be
capturedexceptfor720p,1035i,and1080i.
•When capturing the i mage that has bee n adjusted by
theKeystonefunction,theadjusteddataisautomatically
resetand the projector captures an image without
keystonecorrection.
•WhenLogo PIN code lockissettoOn,capturecannot
beselected.
•Whenstarting to capture a new image, the previously
storedimageisclearedevenifyoucancelthecapturing.
•Whenthe re is no ca ptured im age or it i s interr upted
whilecapturinganimage,Usercannot beselected,you
canonlyswitchbetweenDefaultandOff.
Logo PIN code lockThisfunctionpreventsanunauthorizedpersonfrom
changingthescreenlogo.
Off...........Thescreenlogocanbechangedfreelyfrom
theLogoMenu(p.46).
On...........Thescreenlogocannotbechangedwithouta
LogoPINcode.
IfyouwanttochangetheLogo PIN code locksetting,
presstheSELECTbuttonandtheLogoPINcodedialog
boxappears.EnteraLogoPINcodebyfollowingthesteps
below.TheinitialLogo PIN codeissetto“4321”atthe
factory.
Logo PIN code lock
Off
Quit?
Off
Quit?