17
Installation
Connecting the AC Power Cord
Thisprojector uses nominal input voltages of 100-120 V or
200–240VACand itautomaticallyselects thecorrectinput
voltage.It is designed to work with single-phase power
systemshaving a grounded neutral conductor.Toreduce
theriskofelectricalshock,donot plugintoanyothertypeof
powersystem.
Ifyou are not sure of the type of power being supplied,
consultyourauthorizeddealerorservicestation.
Connectthe projector with all peripheral equipment before
turningtheprojectoron.
Note:
UnplugtheACpowercordwhentheprojectorisnot
inuse.Whenthisprojectorisconnectedtoanoutlet
withtheACpowercord,itisinStand-bymodeand
consumesalittleelectricpower.
TotheACoutlet.
(200 - 240 V AC)
NOTE ON THE POwER CORD
ACpowercordmustmeetrequirementofthecountrywhereyouusetheprojector.
ConfirmtheACplugtypewiththechartbelowandproperACpowercordmustbeused.
IfsuppliedACpowercorddoesnotmatchyourACoutlet,contactyoursalesdealer.
Topowercord
connectoronyour
projector.
Projector side AC outlet side
Ground
TotheACoutlet.
(120 V AC)
For the U.S.A. and Canada
TotheACoutlet.
(200 - 240 V AC)
For the U.K.For Continental Europe
CAUTION
TheACoutletmust benearthis equipmentandmust be
easilyaccessible.
ConnecttheAC power cord (supplied) to the
projector.