APPENDIX

INDICATORS AND PROJECTOR CONDITION

Check the Indicators for projector condition.

 

Indicators

 

Projector Condition

LAMP

WARNING

READY

LAMP

REPLACE

TEMP.

 

 

green

red

 

 

yellow

red

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The projector is OFF. (The AC Power Cord is unplugged.)

 

 

 

 

 

 

 

 

The projector is READY to be turned on with the POWER ON-

 

 

 

OFF button.

 

 

 

 

 

 

 

 

 

 

 

 

The projector is operating normally.

 

 

 

 

 

 

 

 

 

The temperature inside the projector is abnormally high. The

 

 

 

 

projector cannot be turned on. When the projector is cooled

 

 

 

down enough and the temperature returns to normal, the READY

 

 

 

indicator lights green and the projector can be turned on. (The

 

 

 

 

 

 

 

 

WARNING TEMP. indicator keeps flashing.) Check and clean

 

 

 

 

the Air Filter.

 

 

 

 

 

 

 

 

 

The projector is cooled down enough and the temperature

 

 

 

returns to normal. When turning on the projector, the WARNING

 

 

 

 

TEMP. indicator stops flashing. Check and clean the Air Filter.

 

 

 

 

 

 

 

 

The projector is being cooled down. It cannot be turned on until

 

 

 

the READY indicator lights green.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The projector detects an abnormal condition and cannot be

 

 

 

 

turned on. Unplug the AC Power Cord and plug it again to turn

 

 

 

on the projector. If the projector is turned off again, disconnect

 

 

 

the AC Power Cord and contact the dealer or the service center

 

 

 

 

 

 

 

 

for service and checkup. Do not leave the projector on. It may

 

 

 

 

cause electric shock or a fire hazard.

 

 

 

 

 

 

The projector is in the Power management mode.

• • • on

• • • flashing

• • • dim

• • • off

When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp Replace Counter after replacement of the lamp.

44

Page 44
Image 44
Eiki MODEL LC-SB10 owner manual Indicators Projector Condition, Appendix Indicators and Projector Condition