Selecting Video System | Eiki MODEL LC-SB10 specification

VIDEO INPUT

SELECTING VIDEO SYSTEM

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT buttons to move the red
	frame pointer to the AV SYSTEM Menu icon.
2	Press the POINT DOWN button to move the red arrow pointer to
	the system that you want to select and then press the SELECT

button.

VIDEO JACK OR S-VIDEO JACK

Auto

The projector automatically detects incoming Video system, and adjusts itself to optimize its performance.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV SYSTEM MENU (VIDEO OR S-VIDEO)

AV SYSTEM Menu icon

This box indicates the system being selected.

Move the pointer to the system and press the SELECT button.

Y, Pb/Cb, Pr/Cr JACKS

Auto

The projector automatically detects incoming Video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.

AV SYSTEM MENU (COMPONENT VIDEO)

AV SYSTEM Menu icon

This box indicates the system being selected.

Move the pointer to the system and press the SELECT button.

32

Image 32

Eiki MODEL LC-SB10 Selecting Video System, PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N, AV System Menu Video or S-VIDEO

Contents

Model LC-SB10 To the Owner Safety Instructions Voor de klanten in Nederland Compliances Federal Communication Commission Notice Table of Contents Features and Design ComputersColor Systems Component Video Preparation Name of Each Part of Projector SETTING-UP Projector Connecting AC Power CordFor Continental Europe For the U.S.A. and Canada Room Light Adjustable FeetPreparation Positioning Projector Preparation Installing Projector in Proper Position Moving Projector Connecting Projector Terminals of ProjectorVideo Input Jack Audio Input Jacks Computer Input DIGITAL/ANALOG Connecting to Computer Terminals Projector Connecting to Video Equipment Terminals Operation of Remote Control DIP Switch in the Battery CompartmentBefore Operation Laser Pointer Function Remote Control Batteries Installation TOP Controls and Indicators Lamp Replace Indicator Flow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Before Operation Menu BAR Guide Window Lamp mode Basic OperationTurning on / OFF Projector Turning on Projector Adjusting Screen Focus AdjustmentKeystone Adjustment Picture Freeze Function Sound Adjustment Timer FunctionBasic Operation No Show Function Direct Operation Selecting Input Source RGBRGB Scart RGB Digital RGB Analog Input Menu Selecting Computer System Computer InputSelect Computer System Manually Svga Computer Input Compatible Computer Specifications ResolutionFreq KHz PC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC Adj Computer Input Manual PC Adjustment Full screen Display areaDisplay area H Picture Image Adjustments Image Level Select DirectImage Level Select Menu Image 1~4 Computer Input Image Level Adjustment Image Adjust Menu Picture Screen Adjustment Screen Menu Video Input Video Component Video Signal Format Selecting Video SystemPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N AV System Menu Video or S-VIDEO Cinema Image button Standard Cinema Video Input Image Level Adjustment Reset all adjustment to their previous figure Setting Menu SettingSetting Menu To change the code of the Remote Control To change the code of the Projector Lamp Replacement Reset the Lamp Replace CounterAppendix Lamp Replace Lamp Handling Precautions Appendix Lamp Replace Counter Operating Wireless Mouse Operating Wireless MouseInstallation Maintenance AIR Filter Care and CleaningCleaning Projection Lens TOP Control Troubleshooting Remote Control does Wireless MouseNot work Function does not Indicators Projector Condition Appendix Indicators and Projector Condition Technical Specifications Appendix Configurations of Terminals Terminal HDB15-PIN Pin ConfigurationComputer INPUT/MONITOR Output Terminal Analog DVI-I Terminal DIGITAL/ANALOG Optional Parts Key to better communications Canada