COMPUTER INPUT
Display area
Selects the area displayed by this projector. Select the resolution at the Display area dialog box.
Display area H
Adjustment of the horizontal area displayed by this projector. Press the POINT LEFT/RIGHT button(s) to decrease/increase value and then press the SELECT button.
Display area V
Adjustment of the vertical area displayed by this projector. Press the POINT LEFT/RIGHT button(s) to decrease/increase value and then press the SELECT button.
Full screen
When this function is on, SXGA image is fully displayed at 4 : 3
aspect ratio. It is displayed at 5 : 4 aspect ratio with this function off.
NOTE : The Full screen cannot be selected after the Display area, Display area H, and Display area V are adjusted.
3 Store
To store adjustment parameters, move the red frame pointer to the Store icon and then press the SELECT button. Move the red arrow pointer to any of Mode 1 to 5 that you want to store to and then press the SELECT button.
Mode free
To clear adjustment parameters previously set, move the red frame pointer to Mode free icon and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button.
Other icons operate as follows.
Reset
Reset all adjust parameters on the adjustment dialog box to previous figure.
Quit
Closes the PC ADJUST MENU.
NOTE
●The Fine sync, Total dots, Display area (H/V), and Full screen cannot be adjusted when “1035i (HDTV)” or “1080i (HDTV)” is selected in the PC SYSTEM Menu (P23).
Press the SELECT button at the Display area icon and the Display area dialog box appears.
Display area
Press the POINT LEFT /RIGHT button(s) to adjust value and then press the SELECT button.
To store adjustment data.
This Mode has parameters being stored.
Vacant Mode | Shows values of “Total dots,” |
| |
| “Horizontal,” “Vertical,” “Display |
| area H,” and “Display area V.” |
To clear adjustment data.
Close this dialog box.
27
