Attaching an arm | Eizo CG241W guide

5. Reference

5. Reference

5-1. Attaching an arm

The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD monitor.

NOTE

•If you will use the arm or stand of other manufacturers, conﬁrm the followings to the manufacturers before selecting.

-Hole spacing on the arm mounting

100 mm x 100 mm (VESA compliant)

-Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such as a cable

-TÜV/GS approved arm or stand

•Please connect cables after attaching an arm stand.

Setup Procedure

1

2

Lay the LCD monitor down. Do not scratch the panel.

Remove the tilt stand by loosening the screws.

Unscrew the four screws securing the unit and the satand with the screwdriver.

3Attach an arm stand to the LCD monitor securely.

Secure the monitor to the arm or stand using the screws speciﬁed in the user's manual of the arm or stand.

29

Image 29

Eizo CG241W manual Attaching an arm, Attach an arm stand to the LCD monitor securely

Contents

APPENDIX/ANHANG/ANNEXE Safety Symbols Location of the Caution Statements Refer all servicing to qualiﬁed service personnelDo not open the cabinet or modify the unit Keep small objects or liquids away from the unit Handle the power cord with care To disconnect the power cord, grasp the plug ﬁrmly and pullNever touch the plug and power cord if it begins to thunder Place the unit at the strong and stable place Periodically clean the area around the plug Use an easily accessible power outletUnplug the unit before cleaning it Do not touch a damaged LCD panel directly with bare hands LCD Panel Introduction Features Indicator status Operation status Buttons and Indicators To use ColorNavigator CE or UniColor Pro Disk contents and software overviewUtility Disk Connection examples Connecting Two PCs to the MonitorSelecting input signal Priority setting Performance Required system environment Making Use of USB Universal Serial Bus Basic Operation and Functions Making Adjustments and SettingsEntering the ScreenManager Exiting the ScreenManager Main menu Sub menu Reference Functions Run the Screen Adjustment Program Screen AdjustmentAdjustment Procedure Press on the control panel Adjust by using Screen menu in the ScreenManager Adjust the output signal range Dynamic Range of the signal To select FineContrast mode Color AdjustmentFineContrast Mode Color Adjustment of the Mode Settings Icons Functions FineContrast Mode Custom SRGB Adjustment Items Brightness To set the brightness of the screen ~100% Procedure Power-save SetupPower Saving System Power Resumption Procedure Locking the settings Off TimerHow to lock How to unlock Automatic brightness adjustment Power Indicator Setting Enlarge the screen size when displaying a low resolution Displaying Lower ResolutionsMode Function Smooth the blurred texts of the enlarged screen Eizo Logo Appearing Function Setting the orientation of the Adjustment menuTo undisplay To display Problems Possible cause and remedy Troubleshooting Position adjustment Refer to the manual of the PC Attach an arm stand to the LCD monitor securely Attaching an arm Restart the computer if the settings have been changed Environmental Settings Digital signals only LCD Panel CleaningCabinet USB Speciﬁcations Dimensions Default settingsBeeper settings Pin Assignment Pin No SignalSignal Remarks Glossary Temperature ResolutionTmds Transition Minimized Differential Signaling SRGB Standard RGB APPENDIX/ANHANG/ANNEXE APPENDIX/ANHANG/ANNEXE For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie