34 Chapter4PowerSavingFunctions

5. W hen “On” is selected, select “EcoView Sense Settings” for setting the details.

Item Setting Range Description

Time 5,30sec
1,3,5,10,15,30,45,
60min
Speciesthetimefromwhenapers onleavesthemonitoruntilthe
“NoPresencedetected”messageap pears.Themonitorshiftsto
thepowersavingmodeabout20secondsaftert hemessageis
displayed.
Sensitivity Level5
Level4
Level3
Level2
Level1
Whenthesettinglevelishigh(“Level5”atmaximum),evenminor
movementsofapersonaredetected,causingthemonito rtoshift
tothepowersavingmodeonlyinfrequently.Ontheotherhand,
whenthesettinglevelislow(“Level1”atminimum),onlymajor
movementsofapersonaredetected,allowingthemonito rtoshift
tothepowersavingmodefrequently.EcoViewSenseisactivated
whenthesensoronthefrontsideofthemonitordete ctsthe
movementofheat.Therefore,thesensitivityshoul dbechanged
dependingonthetypicaluser’sclothe sorthetypicalroom
temperature.Ifthemonitorshiftstoorrec oversfromthepower
savingmodecontrarytoyourexpectati ons,trychangingthesetting
level.
Reset - Thisfunctionresetsalladjustmentstothedef aultsettings.
Note
• W hen the monitor is used in the “Port rait” direction, the det ection sensitivity is lower than the “L andscape” direction.
Try increasing the sensitivit y setting value when switching t he mode to the power saving mode.
• To use the monitor com fortably, increase the sensitivity for h igh temperatures, which r educes the detection sensitivit y,
and reduce the sensitivity for low temp eratures, which increa ses the detection sensitivity.