14 Chapter2AdjustingScreens

2.

Prepare to use analog screen adjustment patterns.

Load the “EIZO LCD Utility Disk” to your PC, and then op en the “Screen adjustment pattern  les”.
Note
• For details and i nstructions on openi ng the “Screen adjustment pat tern les”, refer to the Readme.txt le.

3.

Perform the auto adjustment again with the analog screen adjustment pattern

displayed.

To adjust ickering, screen position, and screen size automatically
Procedure
1. Display Pattern 1 i n full screen on the monitor using the “Scre en adjustment pattern les”.
2. Choose <Auto Adjustment> f rom the Adjustment menu, and press .
3. Choose <Screen> f rom the <Auto Adjustment> menu, and press .
The <Auto Adjustment> menu appears.
4. Select <Execute> with or , and press .
Flickering, screen position, and scre en size are corrected by the aut o-adjustment function.
Ifthescreenisnotdisplayedcorrectlyevenafterper formingtheautoadjustment,performadjustme nts
accordingtothefollowingprocedure.Ifthescreenisdisplayedcorrectly,goto“5.Adjustingco lorgradation.”
(page16).

4.

Choose <Screen> from the Adjustment menu to perform advanced

adjustments.

Adjust the clock, phase and position, in this order.
To eliminate vertical bars
Procedure
1. Choose <Clock> from the <Sc reen> menu, and press .
The <Clock> menu appears.
2. Adjust the clock with or to eliminate vertical bars.
Press or slowly so as not to miss the adjustment point.
3. Press to exit the adjustment.
When blurring, ickering or ba rs appear on the screen aft er adjustment, proceed to “Pha se” to remove ickering or
blurring.