30 Chapter6Reference
●To set input signal selection
Setting Function
Auto Themonitorrecognizestheconnectorthroug hwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavingmode,th emonitorautomatically
displaysanothersignal.
Manual ThemonitordetectsonlythePC’ssignalscurrentlydis playingautomatically.Selectan
activeinputsignalwith .
Procedure
1. Choose <Other s> from the Adjustment menu, and press .
2. Choose <Input Signal> from t he <Others> menu, and press .
The <Input Signal> menu appears.
3. Select “Auto” or “Manual” with or .
4. Press to exit the adjustment.
Note
• When “Auto” is selected for <Input Signal>, the monit or’s power-saving function works only when the two PCs are i n
the power-saving mode.

6-3. Displaying Monitor Information

This function allows you to display the input signal statu s, current resolution and model name.
Information 1/3: Input signal status, re solution, and horizontal/ver tical scan frequencies
Information 2/3: DDC/CI Enable/Disable status
Information 3/3: Model name, serial number, and usage t ime
Procedure
1. Choose <Informat ion> from the Adjustment menu, and press .
The <Information> menu appears.
2. Then, press to check settings, etc.
Attention
• The usage t ime is not always “0” when you purchase the monitor due t o factory inspection.