Eizo FlexScan L350 Attaching an Arm Stand to the Monitor

Attaching an Arm Stand to the Monitor

WARNING

E

•When attaching the monitor to the mount, use the enclosed screws and tighten them securely. When reattaching the monitor to the tilt stand, use the screws that was attached to the monitor originally.

By not doing so may result in injury or failure of the monitor. To attach the mount to the monitor, please read the instruction manual of the mount.

•Use a VESA approved arm-stand. The LCD panel requires 75 mm x 75 mm hole spacing on the arm mounting pad. The arm-stand should be able to support an object weighing 8.0 kg.

•In case of using this LCD monitor with an arm-stand in an office workspace, the arm- stand shall be chosen and used carefully:

-Use only an approved arm-stand (e.g. GS).

-The arm-stand shall have sufficient stability (mechanical firmness) to support the weight of the monitor.

-The arm-stand shall remain in that position where it is manually moved.

-The arm-stand shall have the ability to tilt the monitor forward and backward.

-The height of the upper row shall be less than or equal to 500 mm in relation to the desk surface when the arm-stnad is in its lowest osition.

75 mm x

75 mm

500 mm

(Example)

(1)Lay the LCD monitor down as shown below, not scratching the panel. Remove the tilt loosening the screws. When re-attaching the tilt, use the enclosed screws and fix the tilt to the monitor securely.

Soft Cloth or

Cushion

(2)Place and fix a mount or an arm-stand to the monitor securely.

4 Mounting Screws (enclosed): 4x16 (mm)

1 INSTALLATION 13

Contents

User’s Manual CONTENTS PRECAUTIONS INTRODUCTION 1 INSTALLATION 2 USING THE SCREENMANAGER 5 SPECIFICATIONS APPENDIX PRECAUTIONS Location of the caution statements on the back panel • Do not dismantle the cabinet or modify the LCD monitor • Keep small objects away from the LCD monitor •Keep liquids away from the LCD monitor • Do not touch a damaged LCD panel directly with bare hands •Take care in disposing of the LCD monitor •The equipment must be connected to a grounded main outlet •Handle the power cord with care •To disconnect the power cord, grasp the plug firmly and pull • Use the correct voltage •Set the LCD monitor in an appropriate location •To ensure safety, always unplug the LCD monitor before cleaning it • Never use thinner, benzene, or other strong solvents or abrasive cleaners, as these may cause damage to the cabinet or LCD panel • Periodically clean the area around the plug Others INTRODUCTION About This Manual Package Contents Controls & Connectors Front Rear 1 INSTALLATION 1-1Connecting up PC Settings Connecting the Cables Attaching an Arm Stand to the Monitor 2 USING THE SCREENMANAGER 2-1How to use the ScreenManager About ScreenManager ScreenManager Menus Sub menus Menus Functions Reference How to use the ScreenManager Adjustment Lock 2-2Screen Adjustment Adjustment Procedure Procedure (2) Auto Adjustment (3) Enter the ScreenManager “Screen” menu (4)“Clock” Adjustment Function (5) “Phase” Adjustment (6)“Position” Adjusment Function (7)“Contrast” Adjustment Function (8)Exit the ScreenManager Smoothing 2-3Color Adjustment About Color Adjustments Color Mode Gain Adjustments 2-4 Power-saveSetup PowerManager Set-upProcedure 2-5Other Settings VGA Selection Menu Position Reset 3 TROUBLESHOOTING TNo picture T Imaging problems TOthers 4 CLEANING Cabinet LCD panel SPECIFICATIONS Electrical Specifications Mechanical Specifications Environmental Specifications Certifications and Standards Page Congratulations Why do we have environmentally labelled computers What does labelling involve Environmental requirements Flame retardants Cadmium Mercury CFCs (freons) FCC Declaration of conformity We, the Responsible Party EIZO NANAO Technologies Inc Phone: (562) declare that the product CE Marking Declaration of Conformity Konformitätserklärung Déclaration de conformité Hinweis zur Ergonomie :