Controls the contrast of the screen.
a)Select the “Contrast” icon and push the Enter button to show the “Contrast/Brightness” menu.
b)Press the Auto adjustment button on the front panel while displaying the “Contrast/Brightness menu to automatically adjust contrast.
c)The screen blanks for a moment and adjusts the contrast to the maximum level of the current input signal.
OK | Too High | Too Low |
*In the case of the percentage color flickering between yellow and white, please note that this is not an error but actually the most optimum adjustment point.
*The brightness of the entire screen is con- trolled by changing the “Brightness” controls. No contrast adjustment is required except when the graphics board or the resolution is changed from the previous one.
d)Adjust the “Brightness” as desired using the up and down buttons.
e)After finishing the adjustment, push the Enter button to memorize the settings and return to the “Screen” menu.
(8)Exit the ScreenManagera)To return to the main menu, select the “Return” icon or push the down button twice, followed by the Enter button.
b)To exit the ScreenManager, select the “Exit” icon and push the Enter button. Double clicking the Enter button at any time also exit the ScreenManager menu.
This is the end of the Screen adjustment procedure.
22 2 USING THE SCREENMANAGER