Eizo FlexScan L350 Procedure, (2) Auto Adjustment

		E
• Allow the LCD monitor to warm up for at least 20 minutes before making
adjustments.

•For maximum viewing comfort, it is suggested that the monitor be tilted to eye level.

•To make adjustment easily, install and run the “Screen Adjustment Program” in the attached utility disk. Before adjustment, read the “readme.txt” file.

•Do not continuously press the Control buttons (up, down, right and left buttons) on the front panel, as the adjustment value will change quickly and make it difficult to locate the most suitable adjustment point.

Procedure

Please adjust the screen using the following procedure.

(1)Having read the “readme.txt” file, install and run the “Screen Adjustment Program” in the utility disk.

Step by step adjustment is provided by the wizard guide. Follow the wizard or the procedures (2) to (7) below.

•If the user's operation system has no utility disk (e.g. OS/2), we recommend setting the desktop pattern to that as shown in the diagram below.

Every-other-dot pattern

(2) Auto Adjustment

Push the Auto adjustment button on the front panel. The following message will appear and remain on the screen for 5 seconds. While the message is on the screen, push the button again to automatically adjust the screen position. If you do not wish to do adjust the screen, do not push the button again. The message will disappear.

•The Auto adjustment function is intended for use on Macintosh and PCs running Windows. It may not function properly if any of the following applies:

2 USING THE SCREENMANAGER 19

Contents

User’s Manual CONTENTS PRECAUTIONS INTRODUCTION 1 INSTALLATION 2 USING THE SCREENMANAGER 5 SPECIFICATIONS APPENDIX PRECAUTIONS Location of the caution statements on the back panel • Do not dismantle the cabinet or modify the LCD monitor • Keep small objects away from the LCD monitor •Keep liquids away from the LCD monitor • Do not touch a damaged LCD panel directly with bare hands •Take care in disposing of the LCD monitor •The equipment must be connected to a grounded main outlet •Handle the power cord with care •To disconnect the power cord, grasp the plug firmly and pull • Use the correct voltage •Set the LCD monitor in an appropriate location •To ensure safety, always unplug the LCD monitor before cleaning it • Never use thinner, benzene, or other strong solvents or abrasive cleaners, as these may cause damage to the cabinet or LCD panel • Periodically clean the area around the plug Others INTRODUCTION About This Manual Package Contents Controls & Connectors Front Rear 1 INSTALLATION 1-1Connecting up PC Settings Connecting the Cables Attaching an Arm Stand to the Monitor 2 USING THE SCREENMANAGER 2-1How to use the ScreenManager About ScreenManager ScreenManager Menus Sub menus Menus Functions Reference How to use the ScreenManager Adjustment Lock 2-2Screen Adjustment Adjustment Procedure Procedure (2) Auto Adjustment (3) Enter the ScreenManager “Screen” menu (4)“Clock” Adjustment Function (5) “Phase” Adjustment (6)“Position” Adjusment Function (7)“Contrast” Adjustment Function (8)Exit the ScreenManager Smoothing 2-3Color Adjustment About Color Adjustments Color Mode Gain Adjustments 2-4 Power-saveSetup PowerManager Set-upProcedure 2-5Other Settings VGA Selection Menu Position Reset 3 TROUBLESHOOTING TNo picture T Imaging problems TOthers 4 CLEANING Cabinet LCD panel SPECIFICATIONS Electrical Specifications Mechanical Specifications Environmental Specifications Certifications and Standards Page Congratulations Why do we have environmentally labelled computers What does labelling involve Environmental requirements Flame retardants Cadmium Mercury CFCs (freons) FCC Declaration of conformity We, the Responsible Party EIZO NANAO Technologies Inc Phone: (562) declare that the product CE Marking Declaration of Conformity Konformitätserklärung Déclaration de conformité Hinweis zur Ergonomie :