English

5.Switch on the PC’s power.

The monitor’s power indicator will light up (blue).

If an image does not appear, refer to the “7. TROUBLESHOOTING” (p. 41) for additional advice.

Whenever finishing your operation, turn off the PC and the monitor.

NOTE

zWhen turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen.

zAdjust brightness of the screen depending on the brightness of your environment.

zBe sure to take adequate rests. A 10-minute rest period each hour is suggested.

6.When using the software, ScreenManager Pro for LCD (for Windows), connect the upstream port of the monitor to the downstream port of the USB compliant PC or another hub with the USB cable.

After connecting the USB cable, the USB function can be set up automatically. For further details about the “ScreenManager Pro for LCD”, refer to the readme.txt in the CD-ROM.

2. CABLE CONNECTION 15