English
7.TROUBLESHOOTING
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.
zNo picture problems → See No.1 ~ No.2
zImaging problems → See No.3 ~ No.13
zOther problems → See No.14 ~ No.17
zUSB problems → See No.18 ~ No.19
| Problems | Points to check with Possible Solutions | |
|
| ||
1. No picture | Check that the power cord is correctly connected. | ||
z | Indicator status: Off | If the problem persists, turn off the monitor power | |
for a few minutes, then turn it back on and try | |||
|
| ||
|
| again. | |
z | Indicator status: Blue | Check the “Brightness” setting. | |
z | Indicator status: Yellow | Switch the signal input by pressing the Input | |
|
| Signal Selection Button on the front control panel. | |
|
| Try pressing a key on the keyboard, or clicking | |
|
| the mouse. (p. 35) | |
z | Indicator status: Slowly | Try pressing the Power Button. | |
| flashing Yellow |
| |
z | Indicator status: Flashing | Try turning the PC on. | |
| Yellow (twice for each) |
| |
|
|
| |
7. TROUBLESHOOTING 41