English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problems

Points to check with Possible Solutions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Horizontal bars of distortion

† Decrease the horizontal bars using the

 

appear.

<Phase>. (p. 29)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7.Letters and lines appear blurred. † Adjust the blurred lines using <Smoothing> (p. 31)

8. Distortion appears like the figure

† This happens when both composite (X-OR)

below.

input signal and separate vertical

 

synchronizing signal are input. Please select

 

one of the two.

9.

The screen is too bright or too

† Adjust the <Brightness> (The backlight of the

 

dark.

LCD monitor has a fixed life span. When the

 

 

screen becomes dark or begins to flicker,

 

 

please contact your dealer.)

 

 

 

10.

Afterimages appear.

† Do you use the screen saver or timer when

 

 

displaying the same image for extended

 

 

periods of time?

 

 

† Afterimages are particular to LCD monitors.

 

 

Avoid displaying the same image for extended

 

 

periods of time.

 

 

 

11.

The screen has defective pixels

† This is due to the characteristics of the panel

 

(e.g. slightly light or dark).

itself and not the LCD product.

 

 

12.

Fingerprints remain on the screen. † Leaving the screen white may solve the problem.

 

 

 

13.

The noise appears on the

† Change the mode in <Signal Filter> in the

 

screen.

<Screen> menu.

 

 

 

14.

The <Smoothing> cannot be

† <Smoothing> is disabled when the screen is

 

selected.

displayed in the 1280 x1024.

 

 

† The image size is doubled both in horizontally

 

 

and vertically to (i.e. 1280 x 960 enlarged from

 

 

640 x 480) provide clear focus which does not

 

 

require this function.

 

 

 

15.

The Main menu of

† The adjustment lock is probably on. To unlock:

 

ScreenManager does not

turn the LCD monitor off. Then, while pressing

 

operate.

the Auto Adjustment Button, turn the power on.

 

 

(p. 25)

7. TROUBLESHOOTING 43