English
Problems | Points to check with Possible Solutions | |
|
| |
16. The Auto Adjustment Button | The Auto Adjustment Button does not function | |
does not operate. | if digital signal inputs. | |
| The adjustment lock is probably on. To unlock: | |
| turn the LCD monitor off. Then, while pressing | |
| the Auto Adjustment Button, turn the power on. | |
| (p. 25) | |
|
| |
17. Frequency does not change after | Use the graphics board’s utility software to | |
installing “Monitor information | change the input signal frequency. | |
file” in the attached utility disk on |
| |
Windows 98/2000/Me/XP. |
| |
|
| |
18. USB function cannot be setup. | Check that the USB cable is correctly | |
| connected. | |
| Check that the PC and OS are USB compliant. | |
| (For verification of USB support, consult the | |
| manufacturer of each system. | |
| Check the PC’s BIOS setting for USB. (For | |
| details, refer to the manual of the PC.) | |
|
| |
19. PC is hung up. / The peripherals | Check that the USB cable is correctly connected. | |
connected to the downstream | Check the downstream ports by connecting the | |
ports do not operate. | ||
peripherals to other downstream ports. If the | ||
| ||
| problem is solved by doing this, contact an | |
| EIZO dealer. (For details, refer to the manual of | |
| the PC.) | |
| Try executing the following method. | |
| z Restarting the PC - Restarting the PC | |
| z Connecting the PC and peripherals directly | |
| If the problem is solved by doing this, contact | |
| an EIZO dealer. | |
|
|
44 7. TROUBLESHOOTING