English

WARNING

The equipment must be connected to a grounded main outlet.

Not doing so may result in fire or electric shock. Not doing so may result in fire or electric shock.

5. Turn on the monitor’s Power Button and then switch on the PC’s power.

The monitor’s power indicator will light up (blue).

If an image does not appear, refer to the “7. TROUBLESHOOTING” (p.40) for advice.

Whenever finished, turn off the PC and the monitor.

NOTE

•When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen.

•Adjust brightness of the screen depending on the brightness of your environment.

•Be sure to take adequate rests. A 10-minute rest period each hour is suggested.

6. When using the software, ScreenManager Pro for LCD (for Windows), connects the upstream port of the monitor to the downstream port of the USB compliant PC or another hub with the USB cable.

After connecting the USB cable, the USB function can be set up automatically. For further details about the “ScreenManager Pro for LCD”, refer to the readme.txt in the “EIZO LCD Utility Disk” CD-ROM.

2. CABLE CONNECTION 15