English

5. Press the power button while pressing the Input Signal Selection button.

The Input Selection menu is appeared on the screen.

Enter Button

 

 

 

Power

 

 

 

 

 

 

Power Button Indicator

 

Input Signal Selection

Control Buttons

Button

(Up, Down, Left, Right)

6. Change SIGNAL 1 (DVI-I Connector) in the Input Selection menu to “ADC”.

Press Enter button to complete the setting and the menu closes.

7. Switch on the PC's power.

The monitor’s power indicator will light up (blue).

If an image does not appear, refer to the “7. TROUBLESHOOTING” (p.40) for additional advice.

Whenever finishing your operation, turn off the PC and the monitor.

NOTE

•When changing the signal connector except ADC, open the Input Selection menu again and change the setting to “Standard”.

18 2. CABLE CONNECTION