2-2 Screen Adjustment

Digital Input

When digital signals are input, images are displayed correctly based on the preset data of the monitor.

Analog Input

The monitor screen adjustment is used to suppress flickering of the screen or adjust screen position and screen size correctly according to the PC to be used. To use the monitor comfortably, adjust the screen when the monitor is set up for the first time or when the settings of the PC in use are updated.

[Adjustment Procedure]

• Automatic Adjustment

1 Press .

A message “Your setting will be lost if you press again now” appears for five seconds.

2 Pressagain while the message is displayed.

The Auto Adjustment function begins (showing a running status message) to adjust clock, phase, display position, and resolution automatically.

If satisfactory adjustment cannot be obtained with the button, perform the adjustment following the procedure below. When the screen is displayed correctly, go to step 5 “Range Adjustment”.

• Advaced Adjustment

3 Run the Screen Adjustment Program.

Load the EIZO LCD Utility Disk on the PC, and start the Screen Adjustment Program compatible with the PC in use.

After the program starts up, perform the adjustment in step 4 following the instructions of the program.

Attention

Wait 20 minutes or more from monitor power on before starting adjustments.

(This period of time is required to stabilize the operation of internal electronic components.)

NOTE

Auto adjustment is available using

. If satisfactory adjustment cannot be obtained with this button, perform advanced adjustments using the Adjustment menu.

Use “Screen Adjustment Program” on the supplied EIZO LCD Utility Disk.

Attention

This function works correctly when an image is fully displayed over the Windows or Macintosh display area. It does not work properly when an image is displayed only on a part of the screen (DOS prompt window, for example) or when a black background (wallpaper, etc.) is in use.

This function does not work correctly with some graphics boards.

NOTE

For how to start the Screen Adjustment Program, refer to “readme.txt” or the “Readme” file. When you are using a Windows PC, you can run the program directly from the start menu of the disk.

If no adjustment program is available for your PC, display a checkerboard pattern on the screen (see below) and go to the following steps.

Chapter 2 Settings and Adjustments 11