Eizo S2100 5-1Attaching an Arm (Option)

5-1 Attaching an Arm (Option)

The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option.

[Attaching]

1 Hold the upper and lower centers of the stand joint cover, and slide sideways to remove it.

2 Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down.

3 Remove the stand. (Prepare a screwdriver.)

Unscrew the two screws (M4 × 10mm) securing the unit and the stand with the screwdriver.

4 Attach the monitor to the arm or stand.

Secure the stand to the monitor with four screws (M4 × 12mm) using a screwdriver.

Fixing screws: M4 × 12mm 4 pcs

Attention

•When using another manufacturer’s arm or stand, confirm the following in advance.

•Clearance between the holes of the arm fixing screws: 100 mm × 100 mm (VESA compliant)

•Strong enough to support weight of the monitor unit (except the stand)

Chapter 5 Reference 25