![](/images/backgrounds/140507/140507-3817x1.png)
Independent setting and saving of color adjustment are available for each FineContrast mode.
●To select an appropriate mode for images
✓: Adjustment/setting available | −: Factory setting |
|
|
| |||||||
Icon |
| Function |
|
|
|
| FineContrast mode |
| |||
|
|
| Custom |
| sRGB | Text | Picture |
| Movie | ||
| Brightness |
| ✓ |
| ✓ | ✓ | ✓ |
| ✓ | ||
|
|
|
|
|
|
|
|
|
|
| |
| Temperature |
| ✓ |
| − | ✓ | ✓ |
| ✓ | ||
| Gamma |
| ✓ |
| − | ✓ | − |
| − | ||
|
|
|
|
|
|
|
|
|
|
| |
| Saturation |
| ✓ |
| − | ✓ | ✓ |
| ✓ | ||
| Hue |
| ✓ |
| − | ✓ | ✓ |
| ✓ | ||
|
|
|
|
|
|
|
|
|
|
| |
| Gain |
| ✓ |
| − | − | − |
| − | ||
| Reset |
| ✓ |
| − | ✓ | ✓ |
| ✓ | ||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| ||||||
Menu | Description |
|
| Adjustment range |
| ||||||
Brightness | To adjust the full screen |
| 0 to 100% |
|
|
| |||||
|
| brightness as desired |
|
|
|
|
|
|
NOTE
•You can also adjust the brightness by pressing or
.
Press after adjustment.
Temperature To select a color | 4000K to 10000K in units of 500K | |
| temperature | (including 9300K). |
NOTE
•The values shown in the Kelvin (K) are available only as reference.
•The setting automatically turns “OFF” if a value under 4,000K or over 10,000K is set.
Gamma To set a gamma value | 1.8/2.0/2.2 | |
|
|
|
NOTE
• Digital signal input is recommended for gamma value setting.
Saturation To adjust color saturation | ||
|
| Setting the minimum |
|
| the image to a monochrome |
|
| screen. |
Attention
• This function does not enable to display every color gradation.
Hue | To change the flesh color, | |||
| etc. |
| ||
|
|
|
|
|
|
| Attention |
| |
| • This function does not enable to display every color gradation. | |||
Gain | To adjust red, green, and | 0 to 100% | ||
| blue to a desired color tone | Adjust the respective brightness of | ||
| respectively | red/green/blue to make a desired | ||
|
|
|
| color tone. Display an image with |
|
|
|
| white or gray background for |
|
|
|
| adjustment. |
NOTE
•Values shown in percentage are available only as reference.
•The <Temperature> setting invalidates this setting. The <Gain> setting returns to the default setting.
Attention
•Perform [Range Adjustment] before starting color adjustment for analog input signals.
Refer to “To adjust color gradation automatically” on page 12.
•The FineContrast mode cannot be changed during color adjustment. Set the FineContrast mode in advance
with .
•Wait 20 minutes or more from monitor power on before starting the color adjustment.
(It takes about 20 minutes for stable operation of internal electronic components.)
•Choose [Reset] from the Color menu to revert to the default setting (factory setting) of the color tone of the FineContrast mode selected.
•The same image may be seen in different colors on multiple monitors due to their
NOTE
•The Adjustment menu and the FineContrast mode name cannot be displayed at the same time.
•Adjustable functions vary depending on the type of FineContrast mode.
Chapter 2 Settings and Adjustments 15