Design Spot 1200C™
©Elation Professional® 32 Design Spot 1200C™
single step procedure. This function will center the pan and tilt motors while at the
same time open the shutter and bring the dimmer to 100%. The pan and tilt function
will still operate if the fixture needs to be positioned to a flat clear surface.
10.6.3 Calibrate values – This function should only be performed by a qualified technician.
This function allows a user to make small adjustments to the effect wheels (color,
gobo, shutter, etc) to compensate for ware or in the event a sensor has been knocked
slightly out of place. Because improper use of this function can result in undesired
operation this function has been password protected. The password is 050 and must
be entered each time the calibration menu function is entered.
10.7.2 This function allows the DMX channels assignment to be changed from the default
value of 18, to either 8bit/16 channels or extended mode at 26 channels. This function
also allows the user to create user defined channel orders allowing the fixture to
match the channel order of other fixtures on the market for easier operation. A total of
three user modes may be configured: User Mode A, User Mode B, and User Mode C.
10.7.3 Edit User mode – This function allows the user to make the actual changes in the
user-defined modes that are created in the previous function.
10.8.1 Select program – This function allows the user to select one of ten of the user
defined built-in programs. This program is then accessed in “Function Mode” under
“Program Run.”
10.8.2 Edit program – This function allows the user to edit the built-in programs.
10.7.1 Edit Scenes – This function allows the user to edit or define the actual scenes that
are stored in the user defined built-in programs that are accessed in the previous
step.
10.7.2 Auto Scenes Rec - The Design Spot 1200C features an integrated DMX recorder by