Elation Professional 1200C - page 44

Design Spot 1200C™
©Elation Professional® 44 Design Spot 1200C™
• Press the Mode/Esc button in order to return to the main menu.
3. Program selection for Auto Pro Part
• Select “Edit program” by turning the encoder.
• Press the Enter button to confirm.
• Select “Select programs” by turning the encoder.
• Press the Enter button to confirm.
• Turn the encoder to select “Auto Pro Part 1”, “Auto Pro Part 2” or “Auto Pro Part 3”, and
thus select which Slave program is to be sent. Selection “Part 1” means, that the
Slave unit runs the same program as the master units.
• Press the Enter button to confirm.
• Press the Mode/Esc button in order to return to the main menu.
4. Program selection for Edit Program
• Select “Edit program” by turning the encoder.
• Press the Enter button to confirm.
• Select “Edit program” by turning the encoder.
• Press the Enter button to confirm.
• Turn the encoder to select the desired program. With this function you can edit specific
scenes into a specific program.
• Press the Enter button to confirm.
• Press the Mode/Esc button in order to return to the main menu.
5. Automatic Scene Recording
• Select “Edit program” by turning the encoder.
• Press the Enter button to confirm.
• Select “Edit scenes” by turning the encoder.
• Turn the encoder to select the desired scene numbers. You can program a maximum
number of 250 • Turn the encoder to select the desired scene numbers. You can
program a maximum number of 250 scenes.
• Press the Enter button to confirm.
• Press the Mode/Esc button in order to return to the main menu.