Elation Professional 300 - page 31

Design Beam 300™
©Elation Professional, Los Angeles Ca. 31 www.ElationLighting.com
8.5 Reset Functions: The reset function returns a motor to the “Home” position. There are
several reset functions available on this fixture. The list below details the functionality of
each available selection.
 Reset All: This function will reset all internal motors to the home position.
 Reset Pan and Tilt: This function will only reset the pan and tilt motors to the home
position.
 Reset Colors: This function will only reset the color wheel to the home position.
 Reset Gobos: This function will only reset the gobo wheels to the home position.
 Reset Shutter: This function will only reset the blackout shutter to the home position.
 Reset Others: This function will reset all other motors not associated with any in the
previously listed reset commands to the home position.
8.6 Effect Adjust:
8.6.1 Test Channel – This menu function allows the user to select each individual
fixture channel and test it’s function independently from the control board.
8.6.2 Lamp adjustment (manual control) – This function readies the fixture for lamp
optimization in a simple single step procedure. This function will center the pan and
tilt motors and at the same time open the shutter and bring the dimmer to 100%. The
pan and tilt function will still operate if the fixture needs to be positioned to a flat clear
surface. For more information on lamp optimization please see Section 5/Page 12.
8.6.3 Calibrate values – This function should only be performed by a qualified technician.
This function allows a user to make small adjustments to the effect wheels (color,
gobo, shutter, etc) to compensate for ware or in the event a sensor has been knocked
slightly out of place. Because improper use of this function can result in undesired
operation this function has been password protected. The password is 050 and must
be entered each time the calibration menu function is entered. Because calibration is
an extremely delicate procedure instruction on performing this action are left out of