Design Spot 575E™
•Press the LCD controls, the display shows “ON” or “OFF”.
•Turn the LCD controls to select “ON” if you wish to strike the lamp or “OFF” in order to switch it off.
•Press the LCD controls to confirm.
•Press the
2.Automatic La-On
With this function you can select if the lamp will be switched on when switching the power on. Select “ON” by turning the LCD controls if you wish to enable this function or “OFF” if you don’t.
3.Lamp on via external controller
With this function you can select if you can switch the lamp on via an external controller. Select “ON” by turning the LCD controls if you wish to enable this function or “OFF” if you don’t.
4. Lamp off via external controller
With this function you can select if you can switch the lamp off via an external controller. Select “ON” by turning the LCD controls if you wish to enable this function or “OFF” if you don’t.
5.Lamp Off if no DMX
With this function you can select to switch off the lamp off automatically if there is no DMX signal). Select “ON” by turning the LCD controls if you wish to enable this function or “OFF” if you don’t.
6.Lamp on at temp.
With this function you can set the inside temperature from which the projector will restrike the lamp after automatic lamp shut off.
7.Lamp off at temp.
With this function you can set the inside temperature at which the projector will
©Elation Professional® | 27 |
| Design Spot 575E™ |
