Elation Professional 575E manual Operation

Design Spot 575E™

10. OPERATION

Operating Modes: The Power Spot 700CMY™ can operate in three different modes.

This next section will detail the differences in the operating modes.

•Stand alone mode - The fixture will react to sound, chasing through the built-in programs.

•Master/Slave mode - You can daisy chain up to 16 fixtures together to get a synchronized light show without the need of an external controller. The fixtures will react to sound chasing to synchronized light show.

•DMX control mode - This function will allow you to control each individual fixtures traits with a standard DMX-512 controller such as the Elation® Show Designer 2.

10.1Universal DMX Control: This function allows you to use a universal DMX-512 controller such as the Elation® DMX Operator II™ or Elation® Show Designer 2™ to control head movement, the color wheel, the shutter (strobe), and all other DMX traits. A DMX controller allows you to create unique programs tailored to your individual needs. The Power Spot 700CMY™ uses 16 DMX channels. See page 27 for detailed description of the DMX traits.To control your fixture in DMX mode, follow the set-up procedures on pages 13-15 as well as the set-up specifications that are included with your DMX controller. Use the controller’s faders to control the various DMX fixture traits.This will allow you to create your own programs.

9.1.1Follow the instruction on page 18 to set the DMX address.

9.2.2For longer cable runs (more than a 100 feet) be sure to use a terminator on the last fixture.

9.2.3For help operating in DMX mode consult the manual included with your DMX

controller.

9.2Stand-Alone Operation (Sound Active): This mode allows a single fixture to run to the beat of the music. Only use this mode when running a single fixture, or when running several fixtures as individuals.

9.2.1Mount your fixture in a secure and stable manner.

©Elation Professional®	33
	Design Spot 575E™