Design LED 60 TriStrip™
5. FIXTURE OVERVIEW
1.Bracket Locking Knob – This knob is used to secure the bracket in place after angle adjustments have been made.
2.Fixture Chassis – Extruded aluminum slotted chassis, allows similar units to be mounted together. See assembly instructions on page
3.Diffusing Lens/LED Assembly – This lens is used to both protect the LEDs as well as diffuse the light output.
4.Eye Bolt – This bolt is used a securing point for a safety cable.
5.On/Off Power Switch – Controls main power to the unit.
6.Power Input/Fuse Holder Assembly – This assembly holds the safety fuse as well as provides a female IEC connector for a power cord. Always replace the fuse with an exact match unless otherwise specified by an authorized Elation Service Technician. Using a fuse other than that specified could seriously damage the unit and will void your manufactures warranty.
©Elation Professional, Los Angeles Ca. | 9 | www.ElationLighting.com |
