Design LED 60 TriStrip™
6. MOUNTING AND INSTALLATION
Yoke Assembly – Single Unit Operation (DLED 12 Brick shown for illustration purposes only). The device can be placed directly on the stage floor or rigged in any orientation on a truss without altering its operation characteristics. When connecting the hanging yoke to the fixture, refer to the illustration below.
Cautions:
For added protection mount the fixtures in areas outside walking paths, seating areas, and away from areas were the fixture might be reached by unauthorized personal.
Before mounting the fixture to any surface, make sure that the installation area can hold a minimum point load of 10 times the device’s weight.
Fixture installation must always be secured with a secondary safety attachment, such as an appropriate safety cable.
To avoid injury, never stand directly below the device when mounting, removing, or servicing the fixture.
Refer to regulations BGV C1 (formerly VBG 70) and DIN
Mounting points
Overhead mounting requires extensive experience, including amongst others calculating
©Elation Professional, Los Angeles Ca. | 11 | www.ElationLighting.com |
