![Installing a PCI Riser Card](/images/new-backgrounds/102712/102712167x1.webp)
Installing a PCI Riser Card
1.Observe the safety and ESD precautions at the beginning of this book. See “Safety Information”.
2.Power down the server and unplug all peripheral devices and the AC power cable(s).
3.Remove the server system cover. For instructions, see “Removing the System Cover”.
4.Remove the processor air duct. For instructions, see “Removing the Processor Air Duct”.
5.Disconnect any cables attached to any
6.Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser Assembly”.
7.Remove any
8.Press the hold the blue riser locking lever (see letter “A” in the figure below).
9.Place riser connector onto retention pins.
10.Slide the riser connector to the left of the riser module to lock it into place (see letter “B” in the figure below).
A
B
AF000147
Figure 54. Installing PCI Riser Card into the Server System
11. Release the blue locking lever.
62 | Intel® Server System SR2500AL User’s Guide |