Warnings

Heed safety instructions: Before working with your server product, whether you are using this guide or any other resource as a reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this guide. Use of other products / components will void the UL listing and other regulatory approvals of the product and will most likely result in noncompliance with product regulations in the region(s) in which the product is sold.

System power on/off: The power button DOES NOT turn off the system AC power. To remove power from system, you must unplug the AC power cord from the wall outlet. Make sure the AC power cord is unplugged before you open the chassis, add, or remove any components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be present on power, telephone, and communication cables. Turn off the server and disconnect the power cord, telecommunications systems, networks, and modems attached to the server before opening it. Otherwise, personal injury or equipment damage can result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives, boards, and other parts. We recommend that you perform all procedures in this chapter only at an ESD workstation. If one is not available, provide some ESD protection by wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on your server when handling parts.

ESD and handling boards: Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by their edges. After removing a board from its protective wrapper or from the server, place the board component side up on a grounded, static free surface. Use a conductive foam pad if available but not the board wrapper. Do not slide board over any surface.

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips over two jumper pins. Some jumpers have a small tab on top that you can grip with your fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab, take care when using needle nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can damage the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board.

Intel® Server System SR2500AL User’s Guide

v

Page 5
Image 5
Intel manual Intel Server System SR2500AL User’s Guide

SR2500AL specifications

The Intel SR2500AL is a high-performance server chassis designed to support a wide range of enterprise applications. Built on Intel's robust architecture, it aims to deliver exceptional efficiency, reliability, and flexibility, which are paramount in a modern data center environment.

One of the main features of the SR2500AL is its versatility in supporting various Intel server motherboards and processor configurations. The chassis can accommodate dual Intel Xeon processors, thereby enabling high levels of processing power suitable for multi-threaded applications. This dual-processor support is crucial for businesses that require high-performance computing capabilities for tasks such as data analytics, virtualization, and cloud computing.

The SR2500AL supports up to 16 DIMM slots, allowing for substantial memory capacity. This flexibility is crucial for applications that require a large amount of RAM to function efficiently, thereby minimizing bottlenecks and enhancing overall system performance. Furthermore, the chassis supports a wide variety of memory types, including ECC (Error-Correcting Code) memory, which enhances system reliability by detecting and correcting common data corruption issues.

In terms of storage, the SR2500AL provides multiple drive bays that can support SAS (Serial Attached SCSI) and SATA (Serial ATA) drives, offering IT administrators the flexibility to configure their storage solutions according to their specific requirements. The server can be configured with both traditional spinning hard drives and solid-state drives, allowing for tailored performance and storage capacity that meets diverse business needs.

Cooling is another critical aspect of the SR2500AL's design. It features advanced thermal management technologies to maintain optimal operating temperatures, thus enhancing the longevity and reliability of the components housed within. The chassis includes multiple strategically placed fans and airflow optimization features that help in the efficient dissipation of heat.

Connectivity is also a strong point for the SR2500AL. It offers a variety of network interface options, enabling seamless data transfer and integration into existing network infrastructures. The chassis can support both Gigabit Ethernet and 10GbE (10 Gigabit Ethernet) networking options, ensuring that businesses can achieve the bandwidth required to maintain high-performance operations.

Overall, the Intel SR2500AL combines powerful processing capabilities, extensive memory support, flexible storage options, and advanced cooling solutions, making it an ideal choice for businesses looking to enhance their infrastructure. With its robust design and thoughtful features, the SR2500AL stands out as a reliable server solution in the demanding landscape of modern enterprise computing.